
There is a vacuum pipe from the inlet tract on the cylinder head to the EVAP purge valve. You can read more about the EVAP System and how to identify the correct vacuum pipe here. Cut this pipe and insert the 4mm Tee connector, and push the vacuum damper elbow onto the third leg of the tee.
View from left side.
The reservoir shown below is the vSystem Micro RMV

Standard Swinging Arm
Dispenser fitted using paddock stand bobbin mount 
Scorpion Dual Injector fitted onto the top of the swinging arm.
Dispenser fitted using chain guard bolt Once fitted, fill and prime the system and set the adjuster knob to ’prime’. Start the engine and turn the adjuster knob until a flow of between 1 and 2 drops per minute is achieved. Check the condition of your chain after a ride, and then adjust as required.
For best results clean your chain before fitting the Scottoiler using paraffin or similar. Then lightly oil the chain from the bottle using a rag or a brush, this allows the oil from the Scottoiler to reach both sides of the chain. 1 to 2 drops per minute will maintain this film of oil on the chain.
Handy Tip: Delivery tubing has been routed with brake hoses under rear hugger.
Find a suitable location for the reservoir



Find a location for the display


Route the delivery tubing
This install is an older kit using the white check valve (it`s now black) and breather extension tube.
The customer also used the black vacuum tubing to route round the swingarm



Once fitted, fill the REP and prime the pump. Attach the delivery tubing and prime until the oil reaches the point where you want to install the check valve. Stop the priming process and cut and insert the check valve at the chosen position. Continue priming the system until oil reaches the sprocket.
For further information you can also watch our installation video that shows the setup steps. How to fill and prime my eSystem?
Set the flow rate, using the ’Driving Screen’ on the Display Unit, to 60-70 seconds per drop (s/dp), check the condition of your chain after a ride, and adjust as required.
Article Number: 583
Author: Apr 13, 2021
Last Updated: Oct 28, 2025
Online URL: https://marketingengineer.de/article/multistrada-v4-2021->-583.html