890 Adventure (2021 >)

 Product Compatibility

  • Magnum HCR
We are always looking for photos of your installation to improve our guides, if you would like to share the setup on your bike please send your installation pics to technical@scottoiler.com.
 

 

  1. Go to vSystem Installation
  2. Go to xSystem Installation
  3. Go to eSystem Installation 

 

 

 
Please Note!

Scottoiler recommend this kit is installed by a trained technician.

 

 

vSystem Installation

Step 1 - Find a vacuum source 

 

Vacuum feed located at right side under fuel tank. 

 

 

 

 

 

 

 

Vacuum feed taken from pipe between throttle body feed + EVAP purge valve.

 

 

 

 

Step 2 - Find a place for the reservoir 

                                              

 

  

Step 3 - Mount the dispenser and connect the system

 

 
Scorpion Dual Injector and different routing of the delivery tubing

The pictures below show how different customers have routed the tubing to fit the Scorpion Dual Injector

      

 

    

 

 

 

Step 4 - Fill, prime and set up your vSystem

Click here for details on filling and priming the vSystem

 

 

 

xSystem Installation

 

General xSystem guide

The xSystem chain oiler is really easy to install and can be mounted on your bike is less than 1 hour. The installation consists of three simple steps:

  • Find a place for the reservoir, either on the frame or under the seat
  • Connect the reservoir to your battery
  • Route the dispenser to your rear sprocket

For an example of the installation see our xSystem Installation Guide. 

If you have our System installed on this specific motorcycle model, we would appreciate if you could send us pictures. With more pictures we can make the installation even easier for all motorcyclists. Please send us your feedback and photos to technical@scottoiler.com. 

 

xSystem location suggestion.

 
 

 eSystem Installation

 

General eSystem guide

The eSystem chain oiler is really easy to install and can be mounted on your bike in less than 1 hour. The installation consists of the three simple steps:

  • Mount the display on your handlebars
  • Connect the display and reservoir to your battery
  • Attach the dispenser and route the delivery tubing to the reservoir

For an example of the installation see our eSystem Installation guide. 

If you have our system installed on this specific motorcycle model, we would appreciate if you could send us pictures. With more pictures we can make the Installation even easier for all motorcyclists. Please send us your feedback and photos to technical@scottoiler.com. 

 

 

 

 

Article Number: 600
Author: Mar 30, 2022
Last Updated: Jan 8, 2026

Online URL: https://marketingengineer.de/article/890-adventure-2021->-600.html